Skip to Content

Custom Sway Bars for Australias Most Wanted Car

Repco Knows - Custom Sways Bars for the Repco-Mod Porsche
9 October 2026 by
Chris Milne - Director

One of the challenges with extensively modified vehicles is that the original suspension components aren't necessarily suited to the finished application.

In the case of the Repco-Mod Porsche, the front end presented an interesting opportunity.

The starting point was an existing Porsche GT3 race-car sway bar. Rather than designing an entirely new shape, Griptech used the original bar as a pattern to manufacture a dimensionally identical replacement, retaining the established race-car geometry and mounting configuration.

The original race-car bar was a hollow 28mm design. Griptech's replacement retained the same 28mm outside diameter but used solid spring steel construction.

With the Porsche's original rear-engine configuration replaced by a front-mounted, twin-turbocharged LS V8, the change in weight distribution presented a new challenge for the suspension package.

The solid replacement was a neat compromise: retaining the established GT3 race-car sway bar geometry while increasing torsional stiffness to help manage the additional weight over the front axle and the vehicle's revised roll characteristics.

Both designs feature four adjustment positions, providing further flexibility to fine-tune the effective sway bar stiffness.

And because a build like this deserves something a little more special than an ordinary black finish, the completed bar received an eye-catching Repco Red powder-coated finish courtesy of Oxytech Powder Coatings.


Got a Sample? It's that easy.

We often recieved questions about where to start with a custom sway bar and often the answer is far more simple than most people realise. We use physical samples to manufacture most of our production bars and we can easily treat any custom bar the same way! We've seen cut'n'shut original bars tweaked within an inch of life, glued together PVC pipe from the plumbing section and everything inbetween. 

You don't necesarily need a technical drawing (althought we accept those too, but even this show stopping Porsche was a case of working from a factory GT3 Racecar bar - You can see what we created below and the rear wasn't too different.


Custom Sway Bar by Griptech Industries - Remanufactured GT3 Porsche 4 Point Adjustable

Direct Replacement Solid Sway Bare Replacement for Original Hollow Design

Custom Sway Bar - Adjustable  Porsche Sway Bar

Solid vs Hollow Sway Bars: Why Construction Matters

It's a common misconception that two sway bars with the same outside diameter will necessarily have the same stiffness.

They won't.

A sway bar works as a torsion spring, resisting twisting as the suspension moves through roll. Its stiffness is influenced by several factors, including material properties, diameter, effective torsion length and arm geometry.

Construction also matters.

A hollow sway bar removes material from the centre of the bar, reducing weight while retaining much of its torsional stiffness. A solid sway bar of the same outside diameter and comparable geometry will generally be stiffer, assuming similar material properties.

For the Repco-Mod Porsche, this presented a particularly practical solution. By reproducing the original 28mm GT3 race-car bar in solid construction, Griptech could increase torsional stiffness without changing the bar's dimensions or established mounting arrangement.

That meant preserving the original race-car fitment while adapting the sway bar's characteristics to the substantially different demands of a front-engined, twin-turbo V8 Porsche.

The four-position adjustment provides additional scope to tune the effective roll stiffness contribution of the front sway bar as part of the overall suspension setup.

It's a great example of how custom sway bar manufacturing isn't always about designing an entirely new component. Sometimes the right starting point is an existing bar with proven fitment, reproduced with carefully selected changes to its specifications..

Check out the full build and  write up at Street Machine Online

 

Keep up with Memphis Hell Febrication on Instagram.

 

REPCO-MOD PORSCHE 996





Chris Milne - Director 9 October 2026